tool kit for flying scot

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #6514
    carltonmonroe
    Participant

    I’m a new owner of a Flying Scot (#4080) and I’m putting together a tool kit to keep handy. I was interested in recomenndations of any items that folks have found useful, in particular any unusual or atypical supplies, tools, etc. Any advice?
    Thanks.

    #13686
    Chrisrog
    Participant

    I will need this info soon as well.
     

    #13688
    FS5516
    Participant

    I usually keep the following handy in my car. A knife, screwdrivers (slotted and phillips), electrical tape to tape the rigging, pliers, tape measure, extra split rings, cotter pins, pins for the blocks, extra cordage of various sizes, boat soap, sponge, brush, dust pan and broom and a 5 gallon bucket.

    #13689
    Honeybadger
    Participant

    I also keep
     
    1.  a ratchet handy in case the winch hande breaks or I need to bear down on the jib halyard to adjust the forestay
    2. Extra winch handle or 3. 
    3. Extra drain plug.

    #13690
    phebejim
    Participant

    A small step ladder to facilitate getting on and off the boat when it’s on its trailer.

    #13691
    abl1111
    Participant

    Rigging knife, wire cutters, Floatation cushion and bungee ( if you capsize, swim to mast to attach so it doesn’t turtle ).  Extra line – to pull mast up if it comes down, and to be towed if necessary. Extra halyards and (1) extra stay.  Extra bolt/nuts for block : rudderhead attachment.  Towel, grease for winch assemb, zip lock bags, and a lantern to attach to mast if you get stuck in dark. An anchor with plenty of line. Flares for emergnecy.  Lots of rum and (6) paks of pineapple juice, cups, coozie’s !  
    I boat in a large, windy, choppy bay where weather and immediate assistance are variables.  If something goes wrong, I’m ready to deal with it.     

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.
Shopping Cart
Scroll to Top