2-1 Jib termination point

By /

Home › Forums › Flying Scot Forums › Owning, Rigging, and Sailing the Flying Scot › 2-1 Jib termination point

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 05/02/2010 at 10:10 am #6156
    admin
    Keymaster

    I thought I would find the information someplace in this forum, but have not.
    Where am I allowed to terminate a 2-1 Jib sheet. On the Track? On the Block?
    Where and how is the best place to accommodate releasing it for 1-1.
    Would be nice to hear how other Scot sailors have done this.
    Thanks Dave 5690

    05/03/2010 at 7:44 am #12933
    FS2925
    Participant

    Contact Flying Scot and they will fax or e-mail you the diagram for the factory set-up.

    05/03/2010 at 10:11 am #12934
    dougc
    Participant

    I tie mine off to the jib car where the block is attached. We release that knot, and tie off to the block at the jib to go back to 1 to 1.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Shopping Cart
Scroll to Top